1. Cleaning and maintenance:
Because the fiber optic cutter is a precision instrument, its use environment is relatively harsh, so it is particularly important to clean and maintain it correctly. When the cutting quality of the cutter is found to be poor or the optical fiber is difficult to cut, a large part of the reason is that dust or debris has fallen into the cutter blade, upper and lower pressure plates, guide grooves, etc., so regular cleaning and maintenance are required.
Use a cotton swab dipped in anhydrous alcohol to wipe the upper and lower pressure plates, blades and guide grooves in one direction.
2. Common faults and solutions:
If the fiber is not placed straight on the cleaver, it may cause poor cutting. Make sure the fiber is placed straight.
If the blade is too high or there is garbage left on the fiber holding clamp, it may also cause poor cutting. You need to adjust the blade height or clean the fiber clamp.
If there is dust or other foreign matter on the blade, you need to clean the blade.
Precautions
1. Pay attention to protecting the blade during use and cleaning, and do not touch the blade with hard objects.
2. The blade is sharp, do not touch it with your hands.
3. Handle with care and pay attention to protection.
Correct use and maintenance of fiber optic cutters are essential to ensure the quality of fiber optic communication construction. Following the above points and maintenance methods can effectively improve the working efficiency and service life of the cutter.
