1.Q: How to adjust the blade height of 0712, 0711 series cleaver ?
A: Adjust the blade height according to the instructions in the manual. Pay attention to the direction of the eccentric shaft when adjusting. The "+" sign direction is for high adjustment, and the "-" sign direction is for low adjustment.
2.Q: How to adjust the blade height of 0713 series cleaver ?
A: Move the push block back to the middle section, and use an Allen wrench to loosen the two set screws of the side cover screws above the blade bracket, and remove the side cover; then loosen the two screws that fix the blade, and use a "slotted" screwdriver to rotate the eccentric shaft to a suitable height, and then restore it according to the above steps.
3.Q: How to adjust the blade height of 0708 series cleaver?
A: Loosen the two fixing screws on the side of the blade holder, and then loosen the locking screw for adjusting the height of the blade holder from the top of the blade holder. Then, use an Allen wrench to rotate the screw for adjusting the blade height to adjust it to the appropriate height, and then restore it by following the above steps.
4.Q: How to adjust the blade height of 1716 series cleaver?
A: Move the push block back to the middle section, and use an Allen wrench to loosen the two set screws of the side cover screws above the blade bracket, and remove the side cover; then loosen the two screws that fix the blade, and use a "slotted" screwdriver to rotate the eccentric shaft to a suitable height, and then restore it according to the above steps.
5.Q: How to adjust the blade height of G9 series cleaver?
A: On the right side of the cutting knife, loosen the screw that fixes the blade, and above the blade bracket, use the hexagonal screw to adjust the blade height to the appropriate height, and restore it according to the above steps.
6.Q: How to adjust the blade height of the B-01 simple cleaver?
A: B-01 is a simple cleaver without a blade height adjustment device
